Tee Height
Two minutes from now I’m going to have an answer for all of you on how high you should be teeing your tee shots so you can improve your swing. The new drivers that have come out in the last 5, 10 years have what is referred to as a deep face.
From the bottom to the top it’s about two or more inches. Most players associate all of that space with teeing the golf ball high. We even have three-inch tees now.
So, that isn’t true. You don’t need that. Some of you might, but most of you don’t.
So, here’s my rule of thumb for how high should you tee the driver: If the mistake you make is that you constantly top the golf ball, that isn’t always the answer. You could fix your posture and bend over a little bit and that would fix topping the golf ball.
If you always hit underneath the golf ball, this isn’t always the answer, where you tee it down so low. Maybe you simply need to get your chin up.
So, a great rule of thumb is that the golf ball should be slightly higher than the center of the club face.
If the golf ball sits much higher than the center of the face, the swing tip to improve your golf would have you hitting the golf ball on the upswing. If it was teed down close to the ground, and you tried to hit the golf ball on the upswing, you might wind up hitting a little grass behind it. Instead, you would have to hit this one on a little bit of the downswing, which is defeating the purpose of the driver. The driver’s swing is a sweeping swing. And you want to catch the golf ball at the bottom of the arc.
At worst, you want to catch it on the way up but not too much on the way up.
Experiment with your tee shots. Play a whole round of golf where you tee it a lot lower than normal, then the next round a little bit lower than normal. And then play the third round where you tee it real high.
I promise you that real high is not the answer. Try that the next time out.Bobby Eldridge is the Head Instructor for the PurePoint Golf Academy where he teaches “The Simple Golf Swing” theory. You can check out PurePoint Golf instructional DVDs athttp://www.golfswingguru.com/index15.htm
Article Source: http://www.simplysearch4it.com/article/52159.html
|
|
CNC Milling Profiler 20 HP Tool Changer High Speed $130,000.00 |
|
|
Machining Center Horizontal High-Speed Mazak FH-4800 $129,500.00 |
|
|
B27253 MINSTER P2-150-54 HIGH SPEED PRESS $119,500.00 |
|
|
Autofeeds high speed laminator 3048 two side $89,900.00 |
|
|
100 Ton Minster P2-100-54 High Speed SSDC Press $89,500.00 |
|
|
B29077 MINSTER P2-100-48 HIGH SPEED PRESS $89,500.00 |
|
|
B25559 AIDA PDA-20H HIGH SPEED STRAIGHT SIDE PRESS $84,500.00 |
|
|
150 Ton Minster P2-150-54-40 High Speed SSDC Press $69,500.00 |
|
|
B27089 MINSTER TR2-60 PULSAR HIGH SPEED PRESS $59,500.00 |
|
|
B29064 MINSTER TR2-60 HIGH-SPEED PRESS $59,500.00 |
|
|
B22731 BRUDERER BSTA 30 HIGH SPEED PRESS $44,500.00 |
|
|
McCain 2500XL high speed, 16 pocket stitcher $40,000.00 |
|
|
B22970 BRUDERER BSTA-20H HIGH SPEED PRESS $39,500.00 |
|
|
B23561 BRUDERER BSTA20 HIGH SPEED PRESS $39,500.00 |
|
|
B26722 OAK 42LP-150 HIGH-SPEED PRESS $39,500.00 |
|
|
30 Ton Minster Pulsar TR2-30 High Speed SSDC Press w/ 2007 Sankyo Feed $35,500.00 |
|
|
B26425 OKADA GMC654 GRAPHITE MASTER HIGH SPEED GRAPHITE $34,500.00 |
|
|
Oak Model 30-SS-30-570 High Speed Straight Side Press $32,000.00 |
|
|
NEW Kodak I1840 Document High Speed Document Scanner 200 dpi $29,995.00 |
|
|
B27294 MINSTER “PULSAR” TR2-30 HIGH-SPEED PRESS $29,500.00 |
|
|
B28030 MINSTER TR2-30 HIGH-SPEED PRESS $29,500.00 |
|
|
45 Ton Minster P2-45-32 High Speed SSDC Press $27,500.00 |
|
|
Minster TR2 Pulsar 30 Ton Stamping Press SSDC High Speed $25,900.00 |
|
|
B25753 MINSTER TR2-30 HIGH SPEED PRESS $24,500.00 |
|
|
B25754 MINSTER TR2-30 HIGH SPEED PRESS $24,500.00 |
|
|
B26224 PRECISION PS2-100 HIGH-SPEED PRESS $24,500.00 |
|
|
HE&M Horizontal high speed Steel band saw H160m 25″ $21,000.00 |
|
|
45 Ton Minster P2-45-32 High Speed SSDC Press $19,500.00 |
|
|
Ledco High-Speed 30″ Thoroughbred Laminator – 1300220 $18,395.95 |
|
|
B26187 MINSTER P2-45-32 HIGH-SPEED PRESS $17,500.00 |
|
|
Brand New Canon imageFORMULA DR-X10C High-speed Scanner $17,000.00 |
|
|
30 Ton Minster Pulsar TR2-30 High Speed SSDC Press w/ Sankyo Feed $16,500.00 |
|
|
GMC BIG BORE GML-2580 HIGH SPEED PRECISION LATHE 25″ x 80″ – NEW $15,850.00 |
|
|
BIG LIBI HIGH SPEED INLINE OR OFFLINE LABELER ON HEAVY DUTY ADJUSTABLE STAND. $14,995.00 |
|
|
Arri SR2 High Speed Camera Denz Video Assist PAL $15,000.00 |
|
|
Vision Research Phantom V7.1 High-Speed Camera System 160,000 Frames Per Sec $15,000.00 |
|
|
Agilent HP 86100B /001/ High-Speed Oscilloscope with Calibration Certificate $14,995.00 |
|
|
100 Dental Fiber Optic highspeed Handpiece KAVO Coupler $12,000.00 |
|
|
Tektronix SCD5000 200 GS/sec Ultra High Speed Digitizer $11,995.00 |
|
|
NAC E-10 PHOTO-SONICS WORLD’S BEST 16MM HIGH SPEED CAMERA 10000 FRAMES ARRI LOOK $11,395.25 |
|
|
Keithley 7174A 8X12 Low Current High speed Matrix Card w/ 708A Matrix Mainframe! $10,999.99 |
|
|
100 Dental Fiber Optic highspeed Handpiece fit KAVO Coupler Swivel 6Hole A New $11,000.00 |
|
|
Victor 618EM Toolroom Lathe High Speed & Accuracy FREE Shipping $10,995.00 |
|
|
Durst Lambda 131HS High Speed 50″ printer, Noritsu, Fuji $10,500.00 |
|
|
Dental High Speed Push Button Fiber Optic Handpiece 5H $10,000.00 |
|
|
FORMAX HIGH SPEED AIR FEED PAPER DOCUMENT FOLDER $9,564.50 |
|
|
B26188 MINSTER HB2-30-24 HIGH-SPEED PRESS $9,500.00 |
|
|
Amana High Speed Combination Oven, NEW, AXP20 $9,360.00 |
|
|
PHOTO-SONICS 35MM 4M COMPACT HIGH SPEED CAMERA ARRI SPECIAL EFFECTS FILMING RARE $8,595.25 |
|
|
DOALL 35-1/2″ x 20″ ZV-3620 Zephyr Vertical Band Saw High Speed $8,500.00 |
|
|
GREAT LAKES TS-37 SHRINK WRAP MACHINE — HIGH SPEED SELLING THIS WEEK!! $8,000.00 |
|
|
Nikon F3H F3 High Speed Camera w/MD-4H Motor, NM-2, MH-2, SB-12 *MINT-* $7,899.00 |
|
|
Intercomp High Speed Shock Dyno,Penske,Ohlins,QA1,Pro,AFCO,FK $7,745.00 |
|
|
MBM Creasematic 150 High-Speed Programmable Creaser – Quiet Operation $7,559.00 |
|
|
Tooling Innovations Induction Heated Tooling Inserter High Speed CNC Machining $7,500.00 |
|
|
Amana AXP20 High Speed Combination Microwave Oven $7,070.80 |
|
|
50SET NSK Dental High Speed handpiece PANA MAX MIDWEST 4HOLE JAPAN WHOLESALE $7,050.00 |
|
|
Beckman J2- HS High Speed Refrigerated Centrifuge with JA-20 Rotor $6,299.99 |
|
|
HIGH SPEED 10,000 FPS CAMERA 16MM USA MADE ARRI SLOW MOTION FILMING RARE $6,695.25 |
|
|
35MM MOTION PICTURE HIGH SPEED CAMERA ARRI ARRIFLEX / MINTY & VERY RARE! $6,645.25 |
|
|
High Speed Dough Mixer $6,000.00 |
|
|
Banner American Finisher 6300 – 63 Inch High Speed Laminator – Hot Roller $5,500.00 |
|
|
FDR Design RSGz High Speed Gas Filling Station Free Shipping US or Canada! $5,500.00 |
|
|
NEW Kuhn SR110 Speed Rake High Capacity Hay Forage Baler Farm Tractor Ranch $5,450.00 |
|
|
Dental High Speed 100 Push Button Handpiece NEW /4 Hole $5,399.00 |
|
|
Reliance Electric High Speed Driver 0-54200-3 (6846) $5,300.00 |
|
|
BITSTORM 4800 EXPRESS HIGH SPEED ADSL MULTIPLEXER NEW $5,195.00 |
|
|
Boxis S700 Auto Shred Level 4 High Speed Cross-Cut Paper Shredder $5,199.99 |
|
|
Martin Yale Mark VII High Speed AutoFolder MK7000 Paper Folder $5,042.95 |
|
|
Arri SR3 High Speed Camera 400′ Timecode Magazine $5,000.00 |
|
|
EE-Tools MultiMax-8G Plus, High speed universal device programmer $4,945.00 |
|
|
Nikon F2 High Speed + MD-100 + MB-100 $4,724.00 |
|
|
Victor VCM200HS High Speed Cutting Machine With Torch, Holder, HoseAnd Fittings $4,647.99 |
|
|
39Y9267 -Nortel 10 Gb Ethernet High Speed Switch Module $4,499.00 |
|
|
Wolke M600 Advanced Industrial High Speed Thermal Ink Jet Label Printer LOT $4,499.95 |
|
|
HP/Agilent E5100B High-Speed Network Analyzer $4,500.00 |
|
|
JOHNSON HIGH SPEED 27 TON OBI PUNCH PRESS MOD# 27 FW-AC $4,500.00 |
|
|
B212″ High Speed Through Hole Rotary Hydraulic Cylinder $4,300.00 |
|
|
High speed case rotating conveyor built by FKI Logistex $3,750.00 |
|
|
Rare Canon F-1 F1 AE Light Metering & Speed High Motor & Grip & FN100 Back Mint $3,999.99 |
|
|
Stewart Case Diverter Switch Model # 1250 HIGH SPEED $4,000.00 |
|
|
35MM HIGH SPEED CAMERA HYTAX REDLAKE MADE IN USA PHOTO-SONICS ARRI / LOOK $3,845.25 |
|
|
ACTIONMASTER HIGH SPEED CAMERA 16 MM 24 – 500 FPS $3,990.00 |
|
|
Vestil High Speed Electric Chain Hoist, ECH-ED-10-1PH $3,899.99 |
|
|
High speed 12ft , frunk Snow Plow $3,900.00 |
|
|
Hoppmann FR30 Centrifugal Feeder SS High Speed $3,850.00 |
|
|
Hoppmann FTF-30-RD Centrifugal Feeder SS High Speed $3,850.00 |
|
|
Victor VCM201HS High Speed Cutting Machine Less Torch And Rack 0200-0225 $3,810.99 |
|
|
100 High Speed Dental Handpiece Turbine For Push Button $3,699.99 |
|
|
100High Speed Dental Handpiece Turbine For Push Button $3,699.99 |
|
|
NEW Scilogex Whisper Quiet LCD High Speed Micro Centrifuge w/ 24 Place Rotor $3,675.00 |
|
|
Scilogex High Speed Personal Refrigerated Mini-Centrifuge 24 Place Rotor, D3024R $3,659.95 |
|
|
T-Tech 5000 high-speed circuit board prototyper in USED CONDITION AS IS $3,600.00 |
|
|
MOAK VERTICAL HIGH SPEED BAND SAW 17″ CUT X 35″ THROAT $3,600.00 |
|
|
50 Dental High Speed Fiber Optic Handpiece LED Large Torque 4 Hole TD4 Top Sale $3,590.00 |
|
|
Axis Communication Inc. 0444-004-AXIS Q6035 HIGH SPEED PTZ NETWORK – Kit $3,581.43 |
|
|
50 x Dental High Speed Fiber Optic LED Handpiece Standard Head 4 Hole TM4 Sale $3,580.00 |
|
|
CAMERA KODAK HIGH SPEED U 3000-MAGNIFAX Mod 334-16 mm $3,500.00 |
|
|
SPEED RADAR GUN K-BAND HIGH PRECISION RS232 TRAFFIC MONITORING CONTROL 24 GHz $3,495.00 |
|
|
Hitachi high speed 16mm movie camera with Nikon f mount $3,375.00 |
|
|
Magic Bullet MBR-1701 17-Piece Express Mixing Set $44.99 Taking up no more space on the counter than a coffee mug, this convenient mixing system replaces a food processor, blender, and coffee grinder. Keep it handy on the countertop for instant meals and snacks. The 17-piece set includes a high-torque power base with a stainless-steel cross blade and flat blade, a tall and a short bullet cup, four party mugs with colored lip rings, a shaker top and a st… |
|
|
Oster Counterforms Blender – Stainless or Black $109.99 The Counterforms 2-In-1 Appliance with Oster Fusion Technology BVCB07-L and BVCB07-B handles the functions of two machines. It mixes liquids like a blender while also performing many common food-processor tasks, such as chopping and pureeing fruits and vegetables. Both units consist of a sturdy base containing a 600-watt motor, a stainless-steel 6-point Star Blade, a large 48-ounce (6-cup) glass b… |
|
|
Oster BCBG08-C 6-Cup Glass Jar 8-Speed Blender, Brushed Nickel $39.50 Brought to you by the #1 Blender brand. A blender that’s anything but basic.Your life isn’t basic. Your blender shouldn’t be either. With this Oster blender you don’t have to sacrifice quality for simplicity. The large capacity, 6-cup glass jar is dishwasher safe and has been Thermal Shock tested so you can pull it out of a steamy dishwasher and safely make a frosty cold beverage right away. The s… |
|
|
Parachutes $7.54 Music doesn’t come more touching than this. With their debut single alone, the emotion-fortified “Shiver,” Coldplay prove they can shift between elated and crushed in a breath, as singer Chris Martin pours out music’s oldest chestnut (unconditional yet unrequited love) with the shakiest of voices and a backdrop of epic guitars. For 10 tracks on Parachutes, he adds newfound meaning to the most tire… |
|
|
Bad (Spec) $5.98 “We wanted a tough album,” producer Quincy Jones recalls in a bonus interview on this special edition of Bad. Though the 1987 blockbuster would appear to be Michael Jackson’s most personal statement to date–9 of its 11 cuts were written solely by him–its appeal also rested more on craft than the idiosyncratic art of Thriller and Off the Wall. At the same time, most of Bad has aged well in spite … |
|
|
The Beatles [USB] $281.00 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed…. |
|
|
Premiere $1.99 … |
|
|
Dean, James at High Speed [VHS] $19.95 … |
|
|
Zoids – The High-Speed Battle (Vol. 2) [VHS] $9.95 Bit struggles to master Liger Zero. When battling Jack Cisco, Team Backdraft or the Desert Gang, Bit manages to use the Liger Zero by itself or with the custom high-s peed Jager unit effectively. However, in close-combat against the Zaber Fangs, he has to add on the Schneider unit! As if that wasn’t difficult enough, a sudden tornado may turn a potential defeat into a life-threatening situatio… |
|
|
Dora and Diego to the Rescue! $1.99 … |
